User Manual
PT-PSW-41RS
8
Step8.
Connect a reset button to the SIG 5V port as needed, the button can be used as
a video source selector.
Step9.
Connect the included IR Receiver to the IR IN port, the Switcher can be
controlled through the IR remote. While connect an IR Emitter to the IR OUT
port of HDBaseT port, the third party device connected to HDBaseT Receiver
also can be controlled via IR remote.
Step10.
Connect control device (e.g. PC) to the RS232 port of the Scaler Switcher or
HDBaseT Receiver (bi-directional RS232 control, either end is available). The
Scaler Switcher can be control by sending RS232 commands via PC.
Step11.
Connect DC12V power adaptor to the power port (HDBaseT Receiver is able
to get power from the Scaler Switcher with PoH function).
Notice:
The Scaler Switcher supports unidirectional PoH, i.e., If the power adapter is
connecting with the Switcher, HDBaseT Receiver can be powered through HDBT port; but
when the power adapter is connecting with HDBaseT Receiver, the Switcher cannot be
powered by the HDBaseT Receiver.
3.4
Application
The Scaler Switcher has a good application in various occasions, such as computer
realm, monitoring, conference room, big screen displaying, television education,
command & control center and smart home etc.
