User Manual
PT-PSW-21C
8
5.
Button Control
5.1
Manual Switching
When the switcher is in the manual switching mode, press the
SELECT AUTO/3s
button repeatedly to cycle through the two video inputs, and the corresponding
source LED lights up orange immediately.
5.2
Automatic Switching
Press and hold the
SELECT AUTO/3s
button at least three seconds to enable automatic
switching. The current input source will not be changed, and its source LED will turn
green.
When in the AUTO mode, the switcher will switch according to the following rules:
⚫
Press and hold the
SELECT AUTO/3s
button at least three seconds again can exit
AUTO mode, but the input source will not be changed, and the corresponding
source LED will turn orange.
⚫
New input: Upon detecting a new input, the switcher will automatically select the
new input.
⚫
Press the
SELECT AUTO/3s
button also can forcibly change the input source.
⚫
Reboot: Once power is restored to the switcher, it will automatically reconnect the
input before powered off.
⚫
Source removed: When an active source is removed, the switcher will switch to the
other active input.
