User Manual
PT-HDBT-703-TXWP
11
②
When control the far-end third party device from local control device (e.g. PC),
connect the PC to the RS232 port of the switcher, and then connect the third party
device (e.g. projector) to the RS232 port of receiver. The connection diagram
shown as below:
6.2
RS232 Control Software
Installation:
Copy the control software file to the control PC
.
Uninstallation:
Delete all the control software files in corresponding file path.
Basic Settings:
Connect the PT-HDBT-703-TXWP with all input devices and output devices needed,
then to connect it with a computer which is installed with RS232 control software.
Double-click the software icon to run this software.
Here take the software
CommWatch.exe
as example. The icon is showed as below:
PoC
HDBT OUT
RS232
Tx
Rx
DC IN
IR IN
Sig
5V
24V
RX
TX
Projector
Power In
PoC
Laptop
