User Manual
PT-C-HDCEC
19
6.1.7
System Command
Command
Function
Feedback Example
RST.
Factory reset.
Factory Default!
DOWNSCALER[X].
Enable or disable 4K to1080p
down-scaling function.
X
Description
0
Disable
1
Enable
DOWNSCALER0.
Close Down Scaler Function!
GDOWNSCALER.
Report down-scaling status.
DOWN SCALER FUNCTION IS
OPEN!
GALLINFO.
Report all device information.
GEDIDMODE.
Report EDID.
EDID:PASS THROUGH
GHDCPMODE.
Report HDCP mode.
6.2
Front Panel IR Learning
Besides configuring IR control using RS232 commands. The IR commands can be
learned from the IR remote by the
SET
button on the front panel.
Please follow the steps below to learn the IR commands from the IR remote:
Step 1:
Press
SET
to choose
DISPLAY ON
or
DISPLAY OFF
command to be set.
DISPLAY ON LED:
Flashing indicates that
DISPLAY ON
mode is selected.
DISPLAY OFF LED:
Flashing indicates that
DISPLAY OFF
mode is selected.
Step 2:
Point the IR remote at the
SENSOR
and press the respective button on the IR
remote.
Step 3:
The
DISPLAY ON
or
DISPLAY OFF
LED will stop flashing and remain lit to
indicate that IR command has been learnt.
IR LEARNING
DISPLAY
ON
SENSOR
SET
DISPLAY
OFF
