Puretec UF10 Series, Руководство пользователя, Страница: 5 / 20

5 Copyright © Puretec Pty Ltd 2020 UF Series User Guide
Before Installation
Professional Installation Required
• Installation requires shutting water off to home, cutting home water supply pipe
and using a welding torch to add piping and fittings. Specialised tools and skills are
required. Installation should be carried out by a qualified plumber.
Make Sure Your Water Has Been Thoroughly Tested
• An analysis of your water should be made prior to the selection of your water
treatment equipment. Your dealer will generally perform this service for you, and may
send a sample to the factory for analysis and recommendations. Enter your analysis
information on Page 4 for your permanent record.
Install Water Treatment Equipment Correctly
• Select the location of your system with care. Various conditions which contribute to
proper location are as follows:
- Install as close as possible to a drain
- Installation of a 5 micron prefilter before the UF System is highly
recommended, as this will protect the system fouling prematurely.
• Install in correct relationship to other water treatment equipment. Contact Puretec for
assistance.
• Water temperatures outside 0-37 ° C will damage the system and void the warranty.
• DO NOT install the system in a location where freezing temperatures occur. Freezing
may cause permanent damage and will also void the warranty.
• DO NOT install where water hammer conditions may occur without installing an
arrestor.
• DO NOT subject the system to any vacuum, as this may cause the unit to ‘implode’
and leak. Please make provision for a vacuum breaker if there is a possibility of a
vacuum occurring.
• Allow sufficient space around the installation for easy servicing. Provide a non-
switched 240V power source for the control valve
Facts to Remember While Planning Your Installation:
• All installation procedures MUST conform to local plumbing codes.
• If lawn sprinkling, a swimming pool, or geothermal heating/cooling or water for other
devices/activities are to be treated by the UF System, a larger model MUST be
selected to accommodate the higher flow rate plus the backwashing requirements of
the system. Contact Puretec for assistance.