9
Copyright © Puretec Pty Ltd 2021
Puretec Sparq S4 User Guide
System Identification
1. Cut the tube square and
push in to the tube stop. For
metal tube remove burrs and
chamfer tube end to prevent
O-Ring seal being damaged.
DISCONNECTION PROCEDURE
4. Push collet against body and
slide tube out of fitting.
2. Fitting grips before it seals.
Ensure tube is pushed in to
tube stop.
Figure 5 - How To Use Quick Connect Fittings
3. Tube is secured in
position.
How To Operate The Tap
When the blue light is on, the tap is in 'Sleep Mode'. Press the desired button once and the
LED light will change from blue to green to indicate that the tap is ready. Press the button
again to start dispensing water.
1. Push the
button (top) for cold water.
2. Push the
button (middle) for sparkling water.
3. Push the
button (bottom) for ambient water.