01
P
U
R
E
-P
R
O
P
E
R
F
E
C
T
W
A
T
E
R
S
E
R
IE
S
18
P
U
R
E
-P
R
O
P
E
R
F
E
C
T
W
A
T
E
R
S
E
R
IE
S
PRO
P
URE
DRINKING WATER S YS TEM
PRO
P
URE
DRINKING WATER S YS TEM
About Perfect Water
¨
Features
Four levels of alkaline water.
Two levels of acid water, including super-oxide.
Filter water (non-ionized) - by Reverse Osmosis Water System
Stainless steel output spout
Built-in auto-flushing electrode.
Unique post-operation automatic and silent cleansing for extended lifespan
Voice confirmation every time you select a different pH level
Filter change required indicator
Easy 1-minute change filter compartment
Optional ability to connect direct to plumbing and operate under mains pressure
3.2 Gallons NSF Standards Water Storage Tank.
FDA Approved Polypropylene Made Flat Cap Housing.
Automatic Shut-off Valve, Mini Flow Restrictor, Stainless Steel Check Valve.
Special & Beautiful Water Ionizer faucet
Feed water connector, drain saddle valve.
Four Color Coded 1/4 inch Tubing for System Connection
Completely Assembled
100% Factory Tested and Sterilized Ready for Installation.
Installation Instruction.
¨
PurePro Perfect Water Series ( RO + Water Ionizer )
More and more people understand that the "perfect water" system would combine
the purity of Reverse Osmosis (R/O) and the tremendous benefits provided by
alkaline, ionized water. Historically this has not been easily achieved for a variety
of reasons. Our water technology experts at PurePro have solved the problem of
combining these two phenomenal yet very different water technologies. Now you
can have perfectly clean AND perfectly healthy water by installing RO system with
water ionizer!
Model: ERS-105-NF
Membrane: 100 GPD / 378 LPD Nanofiltration membrane
Operation pressure: 50 - 100 PSI
Dimensions: (cm) 29 (L) x 21 (W) x 42.5 (H) - System
(cm) 28 (L) x 28 (W) x 35 (H)- Tank
Weight: 8 kg - system
4 kg - tank
¨
Specifications: (Reverse Osmosis)
FAQ
Q: What is the guarantee on the PurePro system ?
The PurePro system (excluding filters) is guaranteed for 1 year for material and
workmanship. All defective parts will be replaced free within the first year under
natural breakdown. The membrane has one year pro-rated guarantee.
Q: What factors affect the quantity and the quality of the water production?
There are four major variables to consider:
1.
Pressure
-The greater the water pressure, the better water quantity and
quality it produced. Water pressure of 60 PSI is ideal.
0
0
2.
Temperature
-76 F is the ideal water temperature for R.O. 40 F water will
0
cause the production of R.O. water to fall to half of that at 76 F. The maximum
0
water temperature recommended is 85 F.
3.
Total Dissolved Solids (TDS)
-The higher the amount of dissolved
contaminants in the water, the lower the quantity of water produced. A high
level of TOTAL DISSOLVED SOLIDS can be overcome with additional water
pressure.
4.
Membrane
-Different membranes have different characteristics. Some
produce more water than others; some have better contaminant rejection
capabilities; some have greater resistance to chemical abrasion for longer life.
PurePro system includes NF33-1812-100 The Thin Film Composite (TFC)
membranes combine the best of these characteristics and are considered the
finest membrane in the world.
Q: What is the maintenance schedule for the PurePro system ?
The three pre-filter cartridges should be changed every 6 months. The 5 micron
sediment cartridge filter is the first one; the second is a carbon cartridge filter,
and the third one is a 1 micron sediment filters. (some systems comes with the
Extruded carbon filter.) Failure to change the cartridge every 6 months may
cause chlorine to destroy the membrane.
Q: What does the PurePro series drinking water taste like?
The taste of the PurePro water depends on the amount of contaminants in the
tap water originally. If 95% of dissolved minerals and chemicals are removed,
the R.O. water may taste like distilled water (no minerals), bottled water (low
mineral), or natural spring water (moderate mineral content).
