Pureline Above Ground Pool Gate Скачать руководство пользователя страница 2

Страница: 2 / 7

Installing the Gate

STEP 1: Gate Mounting Bracket
Slide supports into mounting base (DIAGRAM 1). Screw two #8 x ¾” screws into both sides of
each support, attaching it to the mounting base.

The support should be inserted flush to the
backside of the mounting base.

STEP 2: Location
Determine the location of the gate. The
maximum width is 38”. You may be required to
install an artificial upright.

For more information, please refer to Step 2-B:
Artificial Upright.

STEP 3: Mounting Brackets
Install gate mounting brackets to each designated upright. If the Pureline Above Ground Fence

is already installed, remove one end post and support and
replace with a gate mounting bracket and the gate post.

If the fence isn’t installed, follow step 2-A for installing
mounting brackets using four #12 x 1” screws.

STEP 4: Gate Post
Install gate posts (DIAGRAM 2). Slide gate posts onto gate
mounting brackets. Allow at least ½” between the post and
the pool’s top cap. This allows for an easy winter cover
installation.

Attach gate post to gate mounting bracket using eight #8 x
¾” screws.