background image

5

You should: 

•  Work in a well-ventilated area. 

•  Work with approved safety equipment, 

such as dust masks that are specially 
designed to filter microscopic particles.

ADDITIONAL SAFETY RULES FOR YOUR 
IMPACT DRIVER

1. Do not expose to rain or water.
2. Do not drop, shake or strike the battery.
3. Wear hearing protection when necessary. 
Exposure to noise can cause hearing loss.
4. Cutting blades and accessories can 
become very hot. Take care when changing 
or handling any bits or accessories.
3. Recharge the battery only with the 
charger specified by the manufacturer. 
A charger that is suitable for one type of 
battery pack may create a risk of fire when 
used with another battery pack.
4. Use this power tool only with specially 
designated battery packs. Use of any other 
battery packs may create a risk of injury and 
fire.
5. When the battery pack is not in use, 
keep it away from other metal objects like 
paper clips, coins, keys, nails, screws or 
other small metal objects that can make a 
connection from one terminal to another. 
Shorting the battery terminals together may 
cause burns or a fire.
6. Under extreme conditions electrolyte 
may be leak from the battery. If contact 
accidentally occurs, flush your skin with 
water. If electrolyte contacts your eyes, 
additionally seek medical help. Electrolyte 
from the battery may cause irritation or 
burns.  

7. Hold the tool by the insulated gripping 
surfaces, especially when performing an 
operation where the driving bit may contact 
hidden wiring. If the driving bit contacts 
a ‘live’ wire, exposed metal parts of the 
power tool could become ‘live’ and give the 
operator an electric shock.
8. If possible, use clamps or a vice to hold 
your work.
9. When screw driving into walls, floors or 
similar areas, make sure, as far as possible, 
that there are no services (gas or water 
pipes, electric cables etc) in the path of 
the screw.  Striking hidden services could 
cause injury to the user and damage to the 
property.
10. Always hold the tool with both hands for 
maximum control. Keep proper footing at 
all times.
11. Keep hands away from the driving area. 
Do not reach under material being drilled.
12. Always wear appropriate safety glasses 
when using this machine. Every day glasses 
are NOT safety glasses.

WARNING:

 This machine is not intended 

for use by persons (including children) 
with reduced physical, sensory or mental 
capabilities, or lack of experience and 
knowledge, unless they have been given 
supervision or instruction concerning 
the safe use of the machine by a person 
responsible for their safety.

Children should be supervised to ensure 
that they do not have access to, and are not 
allowed to play with, this machine.

18V Li-Ion

Impact Driver

Содержание 18V Impact Driver













Отзывы: