STEP 6 – ENCLOSURE NET ASSEMBLY
WARNING!! To avoid strangulation and entanglement, keep all cords out of the reach of young children
1: Locate the 4x Enclosure Straps and thread as shown in B1.
2: Place the loops around the top of the Enclosure Poles and pull on strap end to fasten.
DO NOT FULLY TIGHTEN STRAPS. You must leave a little slack in the strap for adjustment purposes.
3: Thread the other end of the straps through the loops sewn into the top of the Safety Net, and pull the strap
to tighten.
A) The Top of the Safety Net should be taut, not drooping, near the centers of the 4 panels. Tighten the straps
on the poles if the net is drooping.
B) The Enclosure Poles will bend slightly with the net attached, but
you should not be able to notice the
bend from a distance.
If there is significant bending in the poles that can be seen from a distance, you
must
loosen the straps on the Enclosure Pole Tops.
Locate the elastic bands found on the bottom portion of the Safety Net and follow the instructions as shown
below:
A. Thread the hook of each elastic band through the V-Ring on the trampoline mat.
B. Attach the end of the hook to the next V-Ring over as show in A and B.
