19-00132_MTS8-24_Standard_Installation_Manual_082819_Rev4.docx
Page 3 of 24
Overview
This installation manual is designed to assist you in the installation of your new
pura
DYN
®
Bypass Oil Filtration System.
This manual will go over all aspects of installing the
pura
DYN
®
System on most oil
lubricated equipment. The information in this manual will also assist you in custom
installation of a new
pura
DYN
®
System on generators, marine, heavy construction and
other applications. At any time during the installation, if you have questions, please call
our technical support team.
How the
pura
DYN
®
MTS System Works
The
pura
DYN
®
MTS System has no moving parts and is designed for years of trouble-
free operation. Engine oil enters the
pura
DYN
®
bypass filter through a metering jet
located on the bottom of the MTS unit. The metering jet reduces the flow of oil going
through the
pura
DYN
®
System to approximately 6 to 8 gallons per hour. This slow flow
rate allows the System to trap particles down to below one micron in size. As the oil
travels through the filter element, it passes through a time-released additive package
designed to replenish depleted base additives in filters with additives, thereby
maintaining the oil’s chemical balance and viscosity. The
pura
DYN
®
filter element works
in conjunction with the OEM full flow filter to remove wear particles. An oil analysis will
determine a safe extension of oil changes.
A patented, polymer technology is incorporated into the MTS family of filtration
systems, enhancing the system
’s ability to remove liquid contaminant from lube oil.
Our Polydry
®
(absorbent polymer) technology is able to absorb harmful liquid
contaminant (water) that is emulsified in the oil. After this process the oil will continue
to flow through our
pura
DYN
®
bypass filter which naturally traps other solid
contaminants. The clean oil then exits the bypass filtration unit through a return line
back to the oil pan or sump. This cycle continues as long as the engine or equipment is
operating.
Use of our systems results in continuously clean oil that improved engine performance
with reduced component wear.
It is recommended that the
pura
DYN
®
bypass filter element be changed at the time you
would have normally changed the oil.
Note: Use of anything other than a genuine pura
DYN
®
Filter Element voids the
pura
DYN
®
Product Warranty.
