19-00132_MTS8-24_Standard_Installation_Manual_082819_Rev4.docx
Page 20 of 24
Required Tools and Items for pura
DYN
®
System Installation
1.
Drill and assorted drill bits
2.
Teflon paste or equivalent thread sealant
3.
Open-end wrench assortment
4.
3/8” or ½” drive ratchet with socket assortment
5.
Large, adjustable crescent wrench
6.
Hacksaw
7.
Utility knife
8.
Center punch
9.
Optional banjo fitting to make return hose connection to engine
10.
3/16” I.D. high-pressure hose
11.
13/32
” I.D. return hose
12.
Oil analysis kit(s)
13.
New OEM full-flow oil filter(s)
14.
New oil, as recommended by engine manufacturer
15.
Oil pressure gauge (to verify oil pressure is below 110 psi)
16.
Compressed air to blow out pressure hose upon assembling fittings
17.
Safety eye protectors (shop type)
18.
Protective gloves to handle hot oil
19.
Allen wrenches (U.S. standard sizes)
