Pumpables GENIE ADVANCED, Полное руководство

Страница: 12 / 21

12
Slide the Liquid insert inside the shield assembly and ensure it is attached firmly.
Make sure the valve is secure.
PRESS
Ensure insert is flush with shield. Place seal diaphragm on the shield assembly. Tip
- use your finger to ensure the edge is flush. This is important so the kit is airtight.
L0
3
20:3
0
80
CYC
LE
VAC
UUM
Attach your seal cap & then use your tubing to connect your accessory kit to the
pump motor. Don’t forget to cover the unused air port if you’re single pumping!