pumpa BLUE LINE PXSM, Перевод оригинального руководства пользователя

Страница: 21 / 32

EN
21
3 Pump nameplate
Illustration plate
Qmax = max. flow Max.Temp = max. temperature of liquid Insulation class
Hmax = max. delivery height IP = protection class
Max Depth = max. immersion depth IP = protection class
P2 = motor power RPM = number of revolves per minute
In = max. input current
4 General information
4.1 Application
The submersible pump is designed for boreholes, wells and tanks, for supplying households, lodges
or gardens with clean water. Impellers made of noryl, pump casing, shaft and suction basket made
of stainless steel. The pump is supplied with a 20 m cable and fork. The motor is oil-cooled. For use
up to 40 °C and pH 4-10, the pump is not intended for industrial use.
4.2 Pumped liquids
The submersible pump is designed for pumping clean water without abrasive impurities.
Before starting work on the pump, make sure that the power supply has been switched off and that
it cannot be accidentally switched on.
5 Transport and storage
The submersible pump can be transported in a packed box. It must be firmly anchored so that it
does not tip or roll. Due to the weight of the submersible pump, it is not recommended to be handleed
by women.
If the pump is not used for a long period of time (e.g. one year), it is recommended to empty the pump
completely, rinse it with clean water and store it in a dry, frost-free place.
5.1 Storage temperature
Pump: in a tempered space. The pump must not be exposed to direct sunlight. Ensure that the pump cannot
turn or drop.