Installation and setup
Page C-38
Operator’s Manual PiCCO
2
Version 3.1
5.4
Spider configuration
Figure 38: "Spider configuration" screen
The SpiderVision diagram can be configured individually:
x
First select the number of spider legs (3 to 7)
x
Select the parameter to be placed (left)
x
Select the spider leg where the parameter should be placed
Â
The spider configuration can be opened by direct selection of the spider diagram.
L
New in version 3.1: The
buttons “SVV” and “PPV” are both
available for selection.
Parameter selection
Basic / Individual
The "Basic" setting uses the default setting of the device which can be recalled at any time.