Installation and setup
Operator´s Manual PiCCO
2
Page
Version 3.1
C-21
3.7.1.1
ScvO
2
Input
Figure 23: ScvO
2
input screen
During non-invasive ICG measurement manual input of ScvO
2
and Hb are required for the optional calculation
of VO
2
. In this case the
button automatically changes to the
button.
For calculation of DO
2
only input of haemoglobin (Hb) is necessary.
3.7.2
Display of results
Figure 24: PDR curve and results
Single PDR results are displayed in a table. Current values are displayed in white on the right side of the
table. These values are also displayed in the parameter field. The last 6 measurements can be reviewed.
During the review the values appear in green colour and the corresponding ICG curve is displayed. Older
measurements are displayed in grey and cannot be reviewed.
The current measurement can be deactivated / crossed out by touching the respective value in the table.
Asterisk symbols (***) for PDR/R15 are displayed in the parameter field. Only the last measurement can be
reactivated again.
