Pulse O3-4D1L3, Руководство пользователя

Страница: 2 / 22

O3-4D1L3 U2
1631, Issue 4, October 2009
2
A. Reason for Reissue
This practice has been reissued to update Table 1.
B. Description
The O3-4D1L3 U2 multiplexes/demultiplexes four DS1 signals from an OC3 optical
signal. By using standard, non-proprietary, virtual tributary VT1.5 and synchronous
transport signal STS-1 mapping, the O3-4D1L3 U2 provides fiber-to-fiber compatibility
with synchronous optical network (SONET) multiplexers as well as far-end O3-4D1
Series units.
O3-4D1L3 U2 units do not include optical transceivers. Ordering codes for the
O3-4D1L3 U2 board as well as for available optical transceivers are shown in Table 1.
NOTE
For the remainder of this document, the O3-4D1L3 U2 will be referred to
as the O3-4D1L3.
Table 1. O3-4D1L3 U2 Board and OC3 Transceiver Ordering Codes
Ordering Code
CLEI TM
Code
Wave-
length
Link
Loss
Budget
Maximum
Output
Level
Maximum
Input
Level Number
of Fibers
Type
of Fiber
A. Board (Without Transceiver)
O3-4D1L3 U2 T1L93L0C — — — — — —
B. Available Optical Transceivers
SFP-OC3-1471-30 SOOTAGGM
1471 nm
*
29 dB 0 dBm – 8 dBm 2
Single-
Mode
SFP-OC3-1491-30 SOOTAGKM
1491 nm
*
SFP-OC3-1511-30 SOOTAGLM
1511 nm
*
SFP-OC3-1531-30 SOOTAGMM
1531 nm
*
SFP-OC3-1551-30 SOOTAGNM
1551 nm
*
SFP-OC3-1571-30 SOOTAGPM
1571 nm
*
SFP-OC3-1591-30 SOOTAGRM
1591 nm
*
SFP-OC3-1611-30 SOOTAGSM
1611 nm
*
SFP-OC3-1310-19 SOOTAGTM 1310 nm 19 dB – 8 dBm – 7 dBm
2
SFP-OC3-1550-29 SOOTAGUM 1550 nm 29 dB 0 dBm 0 dBm
SFP-OC3-SF13-13 SOOMAB8A 1310 nm
13 dB – 8 dBm 0 dBm 1
SFP-OC3-SF15-13 SOOMAB9A 1550 nm
SFP-OC3-MM13-10 SOOTAHMM 1310 nm 10 dB – 14 dBm – 14 dBm 2 Multi-Mode
*
CWDM