background image

3

Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call (866) 434-6067.

Safety and Warnings

Maintain a hold with both hands on the handlebars at all times.
Never allow more than one person at a time to ride the scooter.

Do not allow your hands, feet, hair, body parts, clothing or similar articles to come in contact with moving parts, wheels, or drivetrain, while the

motor is running.
Never ride while using a cell phone or wearing headphones.
Never hitch on to or with another vehicle or pull anyone or anything.
Never immerse the scooter in water; electrical and drive components could be damaged by water or create other possible unsafe conditions.

ater, mud, ice, 

bumpy, uneven, slick, or rough surfaces could impair traction and contribute to possible loss of control. Avoid excessive speeds that can occur 

from downhill rides which could cause loss of control.
Do not ride at night or in areas of limited visibility.

originally supplied by the manufacturer are in proper place and in serviceable condition.  That any and all axle guards, chain guards, or other

covers or guards supplied by the manufacturer are in place and in serviceable condition.

Persons with the following conditions shall be cautioned not to operate: Those with heart conditions, pregnant women, persons with head, 

back, or neck ailments, or prior surgeries to those areas of the body. Persons with any mental or physical conditions that may make them 

susceptible to injury or impair their physical dexterity or mental capabilities to recognize, understand, and perform all of the safety instructions 

and to be able to assume the hazards inherent in unit use.
Maximum operating speed is 8 MPH (13 KM/H).

Before each ride the following checks will need to be performed to the scooter:

• Ensure that the brake system is functioning properly.
• Components shall be maintained and repaired in accordance with the manufacturers authorized replacement parts with installation 

performed by dealers or other skilled individuals. 

BATTERIES, FUSES, CIRCUIT BREAKERS & USING THE BATTERY CHARGER

The battery charger should be regularly examined for damage to the cord, plug, enclosure and other parts. In the event of such damage, if 

any is found, the scooter should not be charged until the battery charger has been repaired or replaced.
Use only with the supplied, recommended battery charger.
Always use caution when charging.
The battery charger is not a toy and should be operated by an adult.
Disconnect the battery charger and unplug from scooter when not in use.

Do not exceed recommended charging time.
Always disconnect the battery charger from the scooter prior to wiping down and cleaning with any liquid.

FAILURE TO HEED TO THE WARNINGS LISTED ABOVE INCREASES RISK OF POTENTIAL SERIOUS INJURY. USE THE 

APPROPRIATE CAUTION WHEN RIDING AND ALWAYS WEAR PROTECTIVE GEAR.

Do not mix old and new batteries.  Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
Only use the batteries specified by the manufacturer.

Ensure that the area that the unit is to be operated in is safe and suitable for safe operating.
Ensure that all safety labels are in place and understood by the operator.

FAILURE TO HEED TO THE WARNINGS LISTED BELOW INCREASES RISK OF POTENTIAL SERIOUS INJURY. USE THE 

APPROPRIATE CAUTION WHEN RIDING AND ALWAYS WEAR PROTECTIVE GEAR.

WARNING:

WARNING:

RISK OF FIRE. Do not bypass fuse or circuit breaker.  The circuit breaker on this scooter is not replaceable by the user - it is an integral part of

the controller.  Replace the controller only with an identical part as specified by the manufacturer.

Never use on roadways, near motor vehicles, on or near steep inclines or steps, swimming pools or other bodies of water.

Содержание REVSTER 200















Отзывы: