background image

12

This section is only required when utilizing IR flashers or Receivers in your installation.

1 The IR ports at the ‘INFRARED’ box work as follows:

•  IN port (black) is a 35mm stereo socket that accepts an IR input signal coming into the matrix intended 

to be sent to another room over the HDBT output below It extends the IR signal from the matrix to the 

attached neo Receiver’s IR-Flasher port 

You can connect these ports directly to a 3rd party Control system processor/controller A P8-IR-

Optocable might be required 

 

•  OUT port (grey) is a 35mm stereo socket output designed to attach an IR Flasher to control the Source (Blu-

ray, STB, etc) connected to the HDMI input below The original IR signal can come from the  following: 

•  Any IR signal received by an attached neo Receiver will be routed back to the corresponding ‘IR OUT’ port, 

according to the video routing to that HDBT output – eg if the matrix is routing video from HDMI In #2 

on to HDBT out # 5, then the any IR signal received by the neo Receiver attached to HDBT port #5 will be 

routed and blasted out the matrix’s IR OUT port #2

2 The CONTROL port is designed for legacy control systems where direct IR input is required 

3 The GLOBAL is used for a control system to be able to see all IR signals from all zones We 

recommend using a P8-IR-Optocable for connectivity from this port to your control system 

The HDMI IR IN ports above the HDMI outputs are a little different:

•  INPUT port is only required when using an external HDBaseT extender It is designed to receive 

the incoming IR signal from the HDBaseT set connected to the HDMI output The IR signal will 

then be routed to the corresponding ‘IR OUT’ port on the matrix according to the video routing 

Note: 

If a display is connected locally (i.e. there is no HDBaseT extender set connected to HDMI output) then this IR 

INPUT port should generally not be required in an installation.

IR RECEIVER AND TRANSMITTER PORTS 

Содержание neo:4Pro




































Отзывы: