Operation (continued)
Pre-Start Inspection
□
□
□
□
□
□
□
□
□
□
□
Make sure all safety guards are in place and all nuts
and bolts are secure.
Check oil level in engine crankcase. Add oil if necessary.
Check the fuel supply. Fill the fuel tank no closer
than 1 inch from top of tank to provide space for
expansion.
Be sure the spark plug wire is attached and the spark
plug is tightened securely.
Check depth regulator lever position.
Examine underneath and around engine for signs of
oil or fuel leaks.
Inspect fuel hoses for tightness and fuel seepage.
Look for signs of engine damage.
Remove excessive debris from muffler area and
recoil starter.
Always set the wheels in tilling position before starting
engine.
Always put depth regulator lever in the transport position
before starting engine. Tines should clear ground.
□
□
□
□
□
COLD STARTS
Put the engine switch located on the back of the engine
on the (I) position.
Press the primer bulb 3 times.
Pull the starter grip lightly until resistance is felt then pull
rapidly.
RESTARTING A WARM ENGINE
Put the engine switch located on the back of the engine
on the (I) position.
Pull the starter grip lightly until resistance is felt then pull
rapidly.
3
WARNING:
Gasoline is highly flammable and must be
handled with care. Never fill the tank when the engine is hot
or running. Always move outdoors to fill tank.
Starting the Tiller
4
11
CAUTION:
Please do not start your tiller until you have
read the manual that came with your tiller, and the sections
in this manual tiller controls and safety. If you have read
these, follow the steps below to start your tiller. Always
perform this pre-start checklist before starting the engine.
CAUTION:
Be sure the clutch is disengaged and the shift
lever is in the neutral position to prevent sudden
uncontrolled movement when the engine starts. The clutch
is engaged by pulling in the clutch lever and disengaged by
releasing the lever.
DANGER:
Always keep hands and feet clear of rotating
machine parts.
STOP
I
