8
CONTROLS & FEATURES
CONTROLS
Fuel Valve Lever
(When using gasoline)
The fuel valve lever is located between the fuel tank and carburetor.
The fuel valve lever must be in the ON position for the engine to run.
After stopping the engine, turn the fuel valve lever to the OFF position.
Choke Knob
The choke knob opens and closes the choke valve in the carburetor.
The CLOSED position enriches the fuel mixture for starting a cold
engine.
The OPEN position provides the correct fuel mixture for operation
after starting, and for restarting a warm engine.
Engine Switch
The engine switch controls the ignition system, and it operates the
electric starter.
FUEL VALVE LEVER
CHOKE KNOB
STOP
-- Stops the engine. The engine switch key can be
removed/ inserted.
RUN
-- Running position.
START -- Operates the electric starter.
Circuit Breaker
The circuit breaker will automatically switch
OFF, if there is a short circuit or a significant
overload at the receptacles or output
terminals.
The circuit breaker may be used to switch
the generator power ON or OFF.
ON
OFF
Engine Switch
ON
OFF
STAR
CIRCUIT
BREAKER
OPEN
CLOSED
Fuel Selection Switch
When using gasoline, turn the switch to "GAS"
When using LPG,turn the switch to "LPG"
FUEL SELECTION SWITCH
