Pulsar MicroFlow-i, Инструкция по эксплуатации

Страница: 8 / 56

Page
2
About the
MicroFlow-i
The MicroFlow-i is a 2-wire loop-powered non-contacting velocity sensor,
with hazardous area approval. The sensor provides reliable flow velocity
measurements using short pulses of micro-waves, which are transmitted by an
enclosed antenna. When reflected off a moving surface, the signal experiences
a shift in frequency characteristics. The reflected signal is captured by the on-
board microprocessor via the antenna, and analysed to determine the velocity.
The
MicroFlow-i’s compact and versatile design makes it easy to install and
ideal for confined spaces. Housed in a robust enclosure coupled with a fully
encapsulated microwave antenna, it provides an effective fit-and-forget flow
velocity solution.
Perfect for remote monitoring or when there is no mains power available, due
to its low power consumption. To access flow velocity data, use Pulsar’s
MicroFlow-i HART PC or HART protocol.
Overall the device has outstanding stability, accuracy and repeatability.