Pulsar Flow Monitor, Инструкция по эксплуатации

Страница: 11 / 61

Page 5
Unpacking
Power Supply Requirements
The Flow Monitor can operate from AC supply or from a DC battery. The
AC is 85 – 264V, 50/60Hz. The DC is 22 - 28V. In all cases the Flow
Monitor will typically consume 8W of power, with a maximum of 10W.
Location
All electronic products are susceptible to electrostatic
shock, so follow proper grounding procedures during
installation.
The Flow Monitor must be mounted in a non-hazardous (safe) Area.
When choosing a location to mount the enclosure, bear in mind the
following:
•
Easy access to the enclosure is maintained.
•
The mounting surface is vibration-free.
•
The ambient temperature is between -20ºC and 50ºC.
•
There should be no high voltage cables or inverters close by.
Important Information
All shipping cartons should be opened carefully. When using a box cutter,
do not plunge the blade deeply into the box, as it could potentially cut or
scratch equipment components. Carefully remove equipment from each
carton, checking it against the packing list before discarding any packing
material. If there is any shortage or obvious shipping damage to the
equipment, report it immediately to Pulsar Process Measurement Limited.