www.pulsar.pl
DSOP24V
41
8. The CONFI-DSO program for designers.
The program is available at:
http://www.pulsar.pl/confi-dso-pl
The CONFI-DSO program is designed for the proper and fast configuration of the DSO (voice alarm
system) cabinet. The program has been designed with BOSCH; the main panel of the program is shown below.
Fig. 42. The main panel of the CONFI-DSO program.
There are four main areas in the main panel.
Area 1 contains input data that needs to be configured according to the requirements of the proposed DSO. In
this section you should indicate, among others, the required system back up time (6h, 24h, or 72h), additional
space in the RACK cabinet, and power consumption mode of the system after power failure. It is also possible to
manually change the cabinet depth from 600mm to 800mm (not applicable for the 24U height; these cabinets are
available in 600mm version only).
The Area 2 includes a list of devices that can be installed in the DSO. The list includes two types of units.
The list includes two types of units.
The first type of units, the "Main" tab, includes sound system equipment of the PAVIRO system by BOSCH, e.g. the
PVA-2P500 amplifier, PVA-4CR12 controller, PVA-4R24 router, and the PVA-15CST microphone with keypad
extension. The program will calculate all parameters based on the mentioned units even though they are not
included in the DSOP24V power supply system. Enter the number of devices to be installed in the corresponding
fields.
Select the proper installation location in the "Firefighter's Microphone" field. There are 5 options available.