Pulsar DSOP24V, Руководство пользователя, Страница: 4 / 51

www.pulsar.pl DSOP24V
4
1. System features:

Compliant with the requirements of the PN-EN 54-4
and PN-EN12101-10 standards and pt. 12.2 of the
Regulation of the Minister of Interior and
Administration of the Republic of Poland of
20.06.2007

The CONFI-DSO is a program for designers that has
been designed with BOSCH to support the DSO
configuration

Calibration of batteries using the installer interface

Internal memory of the last 30 events is available via
the LED display

LED optical indication

Output voltage readings

Readings of the output current during battery
operation

Resistance of the battery circuit readings

Failure codes with history

Ethernet communication:

Built-in powerful web server

Online remote monitoring of operating
parameters for a period of around 100 days:
voltage, current, and the resistance in the
battery circuit

Event log of up to 32768 power system failures

Automatic email notifications about power failures

SSL email encryption

Remote battery test

The battery operating temperature readings from
the period up to 5 years

Communication using the MODBUS protocol - a
list of registers is available

A real-time clock (RTC) with battery backup

RTC synchronization with external NTP server

The PSG3LA LED panel for optical and acoustic
indication compliant with the PN-EN54-16 standard for
evaluating the DSO system operation

The LZxxxx safety strip with overcurrent fuses, surge
arresters and a dummy connector

Single-phase or 3-phase power supply

230VAC LDxxxx voltage distribution terminal

Grounding terminals

Full wiring of the housing adjusted individually for each
configuration

Dimensions of RACK cabinets: 24U(600x600),
42U(600x600, 600x800), 45U (600x600, 600x800),
and 50U (600x800)

Protection Class: IP30

Batteries included

Mounting bracket for batteries

Mounting shelves for sound system equipment
(controller, routers, amplifiers)

Support for up to 2 strings of batteries

27,6V DC Uninterruptible Power Supply

High efficiency (up to 90%)

320W-1000W power supply units of the
PS24DSOxxxx series.

Independently protected outputs for OUT1…9
amplifiers

Three independently protected power supply outputs
for ROUTER1…6 router outputs

Fuse status control

LED indication of fuse failure for all outputs

Microprocessor-based automation system

The measurement of the resistance of the battery
circuit

Automatic temperature compensation of the battery
charging

Battery test

Two-phase battery charging

The accelerated battery charging function

Battery electrical continuity control

Battery voltage control

Battery fuse status control

Battery charge and maintenance control

Under-voltage protection (UVP).

Battery overload protection.

Battery output protection against short-circuit

Battery discharge current control

Output voltage control

Acoustic indication of failure

Adjustable indication time of the 230V AC power
failure indication

ALARM
– technical output of collective failure

Technical input of collective failure EXTi

Technical outputs - relay type.

EPS
– technical output of 230V AC power failure
indication

PSU
– technical output of power supply failure
indication

APS technical output of battery failure indication

Protection types:

SCP short-circuit protection

OLP overload protection

OHP overheat protection

Surge protection

The shelf for firefighter's microphone - optional
accessory

The DSOS24V firefighter's microphone power supply
unit compliant with the PN-EN 54-4 and PN-EN12101-
10 standards, and article 12.2 of the Regulation of the
Minister of Interior and Administration of the Republic
of Poland of 20.06.2007 - optional accessory

The enclosure of the DSOS24V-PU firefighter's
microphone - available as an option

The AWO506 End of Line (EOL) Supervision Board -
available as an option

Forced cooling --fan panel with a thermostat, optional
accessory for 24U, standard for 42U, 45U, and 50U

Warranty:

Power supply unit – 3 years from the installation
date, but not more than 3,5 years from the date of
manufacture

Batteries – 1 year from the installation date.