www.pulsar.pl
DSOP24V
36
Fig. 34. Name change.
7.4.4 Network settings.
Select the "Network settings" for access to the network parameters enabling the communication with the
power supply.
Fig. 35. Network settings.
DHCP
– automatic IP address assignment. Once selected, the IP address will be automatically assigned
to the PSU from a pool of free addresses each time the power is turned on. The fields of
subsequent IP parameters: Mask, Gateway - are inactive.
IP
– Place to enter a fixed IP address. When selecting this option, enter the available IP address for
power supply identification.
Mask
– Place to enter the IP subnet mask. It is usually expressed as 255.255.255.0
Gateway
– gateway address. An address that usually allows you to access the Internet or communicate with
computers outside your local network.
HTTP port
– The browser port number. The default value for http is 80.
7.4.5 SNTP settings.
After choosing the "SNTP Settings", you can configure SNTP parameters. The SNTP protocol allows
synchronizing the power supply time with the SNTP server based on UTC time.
Fig. 36. SNTP protocol settings.
Turn on
- Enables the time synchronization function of the power supply
Port
- SNTP server port number
IP
- SNTP server address