Pulsar DSOP24V, Руководство пользователя, Страница: 21 / 51

www.pulsar.pl DSOP24V
21
5.5. Configuration of power supply settings.
The power supply has a configuration menu from which you can configure the settings by changing or
activating certain parameters. A diagram explaining the menu structure is shown below.
Fig. 20. Power supply configuration menu.
Table 14. Description of symbols.
Symbol Description
Additional
information
Battery test
– „tSt”
On
– performing the battery test
Ton
– battery test in progress
Section
5.5.1
6.1
Calibration of the battery circuit” "CAL"
On
– Calibration
Ton
– Calibration in progress
Section
5.5.2
6.2
EPS output delay - "EPS"
Adjustable time lag of the AC power failure
indication
0.10 - 10s (factory setting)
1.0 - 1min
10.0 - 10min
30.0 - 30min
Section
5.5.3
Acoustic indication
– „bUZ”
On
– Acoustic indication on
OFF
– Acoustic indication OFF
Section
5.5.4
Turning off LED display backlight
On
– dimming on
OFF
– dimming off
Section
5.5.5