Pulsar dBi-M, Инструкция по эксплуатации

Страница: 62 / 71

dBi-M INSTRUCTION MANUAL
62
Runtime Registers (Input Registers)
The first table below presents the unit symbols and their corresponding
descriptions for the
Runtime Registers . The second table shows the
addresses, descriptions, and units of the Runtime Registers . These registers
are ‘Read Only’ and can be accessed using the Function Code 4.
Example:
You wish to know the current value for Distance.
Search for register address 4 using the Function code 4 and the information
will then be displayed.
UNIT DEFINITION
U_NO None
U_MU Measurement Unit
U_PC Percentage
U_VU Volumetric Unit
V_TP Degree C
U_MN Minutes
32BIT
REGISTER
ADDRESS
2X 16BIT
REGISTER
ADDRESS
DESCRIPTION UNIT
000 2000-2001 Level U_MU
001 2002-2003 Echo Status U_NO
002 2004-2005 Echo strength U_PC
003 2006-2007 Temperature U_TP
004 2008-2009 Distance U_MU
005 2010-2011 Volume U_MN
006 2012-2013 Space U_MU
007 2014-2015
Level/Distance/Space or Volume
(dependent on what P100 is set to) U_MU
or U_VU
016 2032-2033 Minimum Temperature U_TP
017 2034-2035 Maximum Temperature U_TP
200 *2200 Transducer Type (P101) U_NO
*This 16bit integer register is formatted as big endian (big endian bytes in
the register).