2
3. Assembling instructions:
3.1.
Mount the M6 cage nuts to the RACK cabinet, as shown in the picture below. Then, mount the ARAS rails.
Take notice of the correct positioning of the horizontal rails. Adjust their length between the front and back RACK
profiles.
3.2.
Place the ARAD enclosure onto the slid-out ARAS rails. Next, bolt it from the inside with M4 screws
(included). The enclosure is to be fixed to the front part of the RACK rails with four 4xM6 screws.
MANUFACTURER
Pulsar
Siedlec 150,
32-744
Łapczyca
Tel. (+48) 14-610-19-40, Fax. (+48) 14-610-19-50
http://
www.zasilacze.pl
