4K HDBaseT 6x6 Matrix Switcher
PTN Electronics Limited 9 www.PTN-electronics.com
――O―ENTER‖.
Example: Set the EDID data of INPUT 4 to the forth type of embedded EDID data:
Press
(hold for 3 seconds)
.
Note:
If the conversion is successful, indicators of the pressed buttons will blink green
for three times at normal speed; if the conversion failed, they will blink for three times
quickly.
4.1.3 Inquiry
Check status
Press and hold the button
―ENTER‖ for 3 seconds, it will enter into system inquiry menu.
Use Left and Right direction button to navigate checking the previous/next items.
Function Items
Example
Description
Check the
connection
status of inputs
Y means the corresponding port
is connected with input device, N
means not.
Check the
connection
status of outputs
Y means the corresponding port
is connected with output device,
N means not.
Correspondence
between inputs
and outputs
Shows the correspondence
between the 6 inputs and 6
outputs.
Check if the
input is with
HDCP
Y means the input signal is with
HDCP, N means not.
Check if the
output is with
HDCP
Y means the output signal is with
HDCP, N means not.
Check the
output resolution
Use button
to check the 6
output resolutions separately.
Output check
Press any output button to check its corresponding input.
