4K HDBaseT 6x6 Matrix Switcher
PTN Electronics Limited 6 www.PTN-electronics.com
4)
Connect HDMI displays (e.g. HDTV) to HDMI outputs of the MUH66TP-N or the
receivers with HDMI cables
5)
Connect speakers/earphones to AUDIO output ports
6)
Connect the RS232 port of control device (e.g. a PC) to the RS232 port of either
MUH66TP-N or far-end receivers. RS232 signal can be transmitted bi-directionally
between MUH66TP-N and far-end receivers.
7)
MUH66TP-N can collect IR signal sent by the included IR remote via its built-in IR
sensor or through external IR receiver connected to the IR IN/ IR EYE/ IR ALL IN
port. The IR signal can be transmitted bi-directionally between MUH66TP-N and
far-end receivers.
8)
Connect an AC 100V~240V power outlet and the MUH66TP-N with the AC power
cord.
Note:
1. Connect HDBT ports of MUH66TP-N and far-end receiver with straight-through
cable.
2. Output audio is selectable via RS232 command Audio/[X]:[Y]. It
’s free to select
whether analog audio or HDMI audio to output. Default is HDMI audio.
3. IR receivers connected to IR IN& IR ALL IN should be with carrier. If not, send
command %0900. or %0901.to activate native carrier mode or force carrier mode in
the IR matrix launched between MUH66TP-N and far-end receivers.
3.5 Connection with TPHD402PR
MUH66TP-N boasts 6 HDBaseT output ports which support PoC solution. Connect the
HDBT output ports of MUH66TP-N to HDBaseT Receivers supporting PoC (like
TPHD402PR) via twisted pair. Plug a power supply to the power port of MUH66TP-N,
the HDBaseT Receivers will be energized synchronously with PoC solution.
Po
C
10
0V
~
24
0V
AC
TPHD402PR
