4K HDBaseT 4x4 Matrix Switcher
PTN Electronics Limited
1
u
r
.
x
o
b
-
v
a
.
w
w
w
3
PoC
TPHD402PR 1
HDTV
HDTV
TPHD402PR 2
HDTV
HDTV
TPHD402PR 3
HDTV
TPHD402PR 4
HDTV
PoC
PoC
PoC
IR Emitter
IR Remote
IR Emitter
IR Emitter
IR Emitter
Control far-end device through IR ALL IN port
Note: Send command
“%0901.” to enter infrared carrier enforcing mode if the IR
Receiver connected to IR ALL IN is not with carrier.
4.2.4 Control Local Device Remotely
Connect IR receiver(s) to IR IN on far-end HDBT receiver(s), and IR Emitter(s) to IR
OUT port of the switcher, and use the IR Remote of local source to control the device
remotely.
1 to 1:
Connect an IR receiver to IR IN on far-end HDBT receiver, and an IR Emitter to IR
OUT port of the switcher. Use the IR Remote of local source to control the device
remotely. See below:
PoC
TPHD402PR
DVD
HDTV
IR Remote
IR Emitter
Control local device from remote
Note: Send command
“%0901.” to enter infrared carrier enforcing mode if the IR
Receiver connected to IR IN of the receiver is not with carrier.
Multiple to Multiple: (IR Matrix)
The 4
“IR OUT” ports and the 4 “IR IN” ports on the far-end receivers make up a 4x4
IR matrix. See as below: