HDMI Matrix Switcher 16x16
PTN Electronics Limited
www.PTN-electronics.com
4
Backspace button: To backspace the latest input button.
Switching Operation
:
With the front control panel, the switcher could be control directly and rapidly by
pressing the buttons under below format.
“Input C”Switch Mode”+”Output C”Enter”
1)
“Switch Mode”: “AV”.
2)
“Input Channel”: Fill with the number of input channel to be controlled.
3)
“Output Channel”: Fill with the number of output channels to be controlled.
Notice
: The input/output channels on the rear panel are counting from left to right, top to
bottom. If the input/output channel is two digits number, the input delay time between
two numbers must less than 5 seconds; otherwise the operation will be cancelled.
4.2.
Usage of the IR Remote
With the infrared IR remote, the matrix switcher could be control remotely. Because the
function buttons on the IR remote are the same with the ones on the front control panel,
the IR remote shares the same control operation and command format with the control
panel. Please press the buttons of the IR remote in this order:
Input channe
l ->
Menu
->
Output channel
F4-2
Panel of the IR Remote
The outputs
channels, from
0~9, and plusing
“10+” for more.
The inputs
channels, from
0~9, and plusing
“10+” for more.
Menu, for
switching source
and function
