PTN IPH300, Руководство пользователя

Страница: 16 / 47

Full HD HDMI over IP Extender
16
6.7
Operation Guidelines
Unless user applies the Tx and Rx devices as 1-to-1 connection in its original default
setting, I would like to give your customers guidelines regarding Mango-M program
usage:
1)
Change operation mode (“Op mode”) to “Manual” (default is “Auto”), save (“Setting”)
and reboot (“Reboot”).
2)
Configure devices, if necessary as it is required, about IP addresses, Grouping
mode, Group #, and etc.
3)
Save (‘Setting’) and reboot (‘Reboot’).
4)
Install the devices to the target field network.
5)
Confirm the connections are correct in the target field network. If not correct, check
and correct the configuration setting values for the devices.
Note: Please don’t forget the devices are set as “Manual” mode. If there are power
supply failure even temporarily, the devices in “Manual” mode will not send/receive
video and wait for the operator to command “Connection” again via Mango.