4K HDMI/Audio Fiber Optical Extender
PTN Electronics Limited 4 www.PTN-electronics.com
Figure 3-1: System diagram
3.4 Connection Procedure
1)
Connect HDMI/DVI source (e.g. DVD) to
HDMI IN
port of FOUH302T with HDMI
cable.
2)
Connect audio source (e.g. PC) to
AUDIO IN
port of FOUH302T with audio cable.
3)
Connect
OPTICAL OUT
port of FOUH302T to
OPTICAL IN
port of FOUH302R with
optical fiber.
4)
Connect HDMI display (e.g. HDTV) to
HDMI OUT
port of FOUH302R with HDMI
cable.
5)
Connect audio amplifier (e.g. speaker/earphone) to
AUDIO OUT
port of FOUH302R.
6)
Connect DC 5V power adapter to FOUH302T and FOUH302R.
Note
: Please connect FOUH302T with FOUH302R via single-mode fiber or OM3
multimode fiber for reliable transmitting.
3.5
EDID management
FOUH302T provide with 4-pin EDID DIP switchers, “1” stands for “On”, “0” stands for
“Off”. There are 8 types of EDID data for HDMI in total. Dial the switchers to change
EDID data referring to the following explanations:
Signal Source
Switcher Status
(1234)
EDID Data
HDMI
0001
4K 2D stereo audio
0010
4K 2D audio pass through
0011
1080P 2D stereo audio
0100
1080P 2D audio pass through
0101
1080P 3D audio pass through
DVD
Laptop
HDTV
DC 5V
DC 5V
FOUH302T
FOUH302R
Speaker
HDMI Signal:
Audio Signal:
Optical Signal:
