Digital Conference System (D-3002)
4.1 D-3002 Initialization
Press the power switch to provide power to D-3002, and then the LCD screen will show
the initialization information, see as below:
Figure 4-2 D-3002 Initialization
After the initialization, the LCD screen will display related information, such as “Menu”,
“MIC”, “Mode” and so on. As follow:
Figure 4-3 Initialization Finished
4.2 Settings after Initialization
Press the
Enter
button to enter the main menu, and Use Up and Down button to switch
between the options.
After the initialization, you need to set the MIC’s value (live delegate microphones) and
Mode value (speech mode) for the conference.
MIC and Mode are to limit the delegate unit. MIC determines the capacity of live
delegate units (total number of the ones who are able to hold a speech, we just call it
“speech capacity” in the following content). And Mode determines what the delegate
unit can do when reaches at the maximum speech capacity or not.
The following content will show you the detailed information about speech number and
speech mode.
4.2.1 MIC Value Setting
Use Up and Down button to switch to the option “MIC”.
Press Enter button to enter into speech number setting interface.
Use Up and Down button to increase/decrease the value of speech number.
11
