T•FOLD User Guide
Page 34
3.5.3
Operation Panel Operation
This section gives an overview of the PPS
T•FOLD
Operation Panel modes.
Waiting to FOLD
When the
T•FOLD
is in Waiting to Fold Mode, it is ready for operation.
Waiting to PACK
In Waiting to Pack Mode, the
T•FOLD
lifts the Flapper #5, it is ready for operation.
Active
In Active mode T•FOLD
is starting folding operation.
3.5.4
Preparing & Loading Garments for Folding
1. Ensure that the
T•FOLD
in the horizontal plane. Any adjustments to the levels should be made to
the
T•FOLD
so that the level is relevant to the loading area of the
T•FOLD
.
2. Load the garment on the
T•FOLD
surface front side down. Make sure it placed in the middle of the
T•FOLD
top. A t-
shirt’s collar
should be placed in 4-6 cm further from the flapper 2/ 3 edge line.
Refer fig. 3-13
A level is critical to achieving good fold results. Always handle the
T•FOLD
with care as
dropping the
T•FOLD
may cause damage rendering it unusable.
FIGURE 3-13 POSITIONING THE GARMENT ON T-FOLD
Содержание T-FOLD
Страница 1: ......
