T•FOLD
User Guide
Page 11
1.3
Electrical Safety
This Product must be operated by the power source as indicated on the product’s data plate.
Consult your local power company to check if your power source meets the requirements.
Connect this product to a protective earth circuit.
This product is supplied with a plug that has a protective earth pin. The plug fits only into
an earthed electrical outlet. This is a safety feature. If the plug doesn’t fit to the outlet,
contact an electrician to replace the outlet to avoid risk of electric shock. Never use an
earthed adaptor plug to connect the product to the electrical outlet that has no earth
connection terminal.
Plug the power cord directly into a grounded electrical outlet. To prevent overheating and
fire, do not use an extension cord, a multi-plug adaptor or a multiple connector. Consult
your local electrician to check if an outlet is grounded.
Connect this product to a branch circuit or an outlet that has larger capacity than the rated
ampere and voltage of this product. Refer to the data plate on the rear panel of this
product for it’s rated ampere and voltage.
Never touch the power cord with wet hands. It may cause electric shock.
Keep the plug connection free of dust and other contaminants. Dust, damp and other
contaminants may cause a minute electrical current in a connector, which may in turn
generate heat and possible cause a fire accident.
To avoid the risk of electric shock and fire accident, only use the power cord supplied with
this product.
Do not damage or modify the power cord. Damage or tampering may generate head and
eventually cause electric shock or a fire accident.
If the power cord is damaged or insulated wires are exposed, replace the power cord. Do
not use a damaged or un-insulated cord to avoid the risk of electric shock and a fire
accident.
Do not operate the
T•FOLD
if it has been contaminated by foreign substances or liquid
spills as doing so may result in electrical shock or fire. Immediately turn off the power
switch, disconnect the power plug from the electric socket, and contact your authorized
PPS Dealer.
Do not insert or drop metal or objects which are easily combustible through the openings
such as the ventilation hole of your
T•FOLD
. Doing so may result in electrical shock or fire.
Do not place the
T•FOLD
in humid and/or dusty areas. Doing so may result in electrical
shock or fire.
Replace the fuse (located in fuse socket, near on/off switch at rear of
T•FOLD
) only with a
4Ampere “slow blow” fuse (4
A, 250VAC/ 120VAC, 5mm x 20mm, Type T)
WARNING
Содержание T-FOLD
Страница 1: ......
