PTI security systems Wireless Door Alarm System, Инструкция по установке и эксплуатации

Страница: 53 / 84

48 rev. 7-2017 114A3873.D
Wireless Door Alarm System
Door Close 0001
Reports the closing of a door.
• The numbers following the message are the transmitter’s registered
channel numbers.
• The controller looks up the channel number in the cross-reference table.
• If the channel is not assigned, the event reports as Unknown Door Close
with a reference to the multiplexer and channel numbers.
• If the channel is assigned, the event will report as Door Close with a
reference to the unit number.
• The actual reporting of the event depends on the configuration of the
controller.
•
Door Open 0001
Reports the opening of a door.
• The numbers following the message are the transmitter’s registered
channel numbers.
• The controller looks up the channel number in the cross-reference table.
• If the channel is not assigned, the event will report as
Unknown Door
Open
with a reference to the multiplexer and channel numbers.
• If the channel is assigned, the event reports as
Door Open
or
Door
Alarm
with a reference to the unit number. This message is conditional,
depending if the tenant of the unit is on-site.
• The actual reporting of the event depends on the configuration of the
controller.
Reported Events
The multiplexer has several different events that it reports for each
transmitter. The following list of events is listed as they appear
on the display of the multiplexer. Each event is followed by a
description of the event and how it reports from the controller.