
12 VOLT DC 1/2 IN. DR. IMPACT WRENCH
OWNER'S MANUAL
Item Number W50099
SPECIFICATIONS:
Drive Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 in .
Max Torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250 ft ./lbs .
Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DC 12V
Maximum Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 AMP
Electrical Cord Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 ft ./3 .6 m
In-Line Rated Fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 AMP
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 .17 lbs .
Specifications are subject to change without notice .
WARNING!
READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS
BEFORE OPERATING THIS TOOL. FAILURE TO DO SO MAY RESULT IN
PERSONAL INJURY AND/OR PROPERTY DAMAGE AND WILL VOID
WARRANTY. NOT FITTED FOR COMMERCIAL USE.
1 YEAR LIMITED WARRANTY
PERFORMANCE TOOL® extends only the following warranties, and only to original retail purchasers . These war-
ranties give specific legal rights. Except where prohibited by local law, the law of the State of Washington governs
all warranties and all exclusions and limitations of warranties and remedies . There may be other rights which vary
from state to state .
PERFORMANCE TOOL® warrants the product to be free from defects in materials and workmanship under
normal use and service . A defective product may be returned for a free replacement within 90 days from the date
of purchase, provided that product is returned to place of purchase immediately after discovery of defect . After
90 days and up to one year from date of purchase, PERFORMANCE TOOL® will replace at no charge any parts
which our examination shall disclose to be defective and under warranty . These warranties shall be valid only
when a sales receipt showing the date of purchase accompanies the defective product or defective part (s) being
returned . For part (s) after 90 days, please remit your request, postage prepaid to:
PERFORMANCE TOOL, P .O . Box 88259 Tukwila, WA 98138
These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other consumables which must be
replaced under normal use and service . These warranties shall not apply to any product or part which is used for
a purpose for which it is not designed, or which has been repaired or altered in any way so as to affect adversely
its performance or reliability, nor shall these warranties apply to any product or part which has been subject to
misuse, neglect, accident or wear and tear incident to normal use and service .
PERFORMANCE TOOL® does not authorize any other person to make any warranty or to assume any liability in
connection with its products .
Except for warranties of title and the limited express warranties set forth above, PERFORMANCE TOOL® makes
no express or implied warranties of any kind with respect to its products . In particular, PERFORMANCE TOOL®
makes no implied warranty of merchantability and no implied warranty of fitness for any particular purpose, except
that for goods purchased primarily for personal, family or household use and not for commercial or business use,
PERFORMANCE TOOL® makes an implied warranty of merchantability (and, if otherwise applicable, an implied
warranty of fitness for a particular purpose), but only for the particular qualities or characteristics, and for the
duration, expressly warranted above .
The laws on limitation of implied warranties may differ from state to state, so the above limitations may not apply
in all cases .
PERFORMANCE TOOL® shall not be liable for consequential, incidental or special damages resulting from or in
any manner related to any product, or to the design, use, or any inability to use the product . The sole and exclu-
sive remedy for a defective product or part shall be the repair, or replacement thereof as provided above . The laws
on limitation of remedies or on consequential, incidental or special damages may vary from state to state, so the
above limitations may not apply in all cases .
© Copyright 2018 WILMAR CORPORATION, P .O . Box 88259 Tukwila, WA 98138
3 . Follow the vehicle manufacturer instruction and specifications for appropriate lifting
locations . Life vehicle using rated jack, jack stands, & wheel chocks .
4 . Select appropriate socket for intended vehicle lug nuts/bolts size and insert it securely all
the way onto impact wrench drive . Make sure socket is tight and secure .
5 . Follow the vehicle manufacturer instruction to remove lug nuts and wheels .
6 . Insert the socket onto the wheel lug nut/bolt and press the upper
side of the impact wrench switch marked "L" to turn on power to
the impact wrench . Keep on pressing and holding the button until
the lug nut/bolt is loosen, it takes about 3 seconds . Repeat this step
to loosen all wheel lug nuts/bolts as needed .
TIGHTENING LUG NUTS/BOLTS ON WHEEL
1 . Follow the vehicle manufacturer instruction to install lug nuts/bolts
and wheels .
2 . Position wheel in place . Insert lug nuts/bolts and thread by hand prior
to tightening with the impact wrench to prevent cross threading .
3 . Insert the socket onto the wheel lug nut/bolt and press the lower side of the impact wrench
switch marked "T" to turn on power to the impact wrench . The lug nut/bolt will be turned in a
clockwise direction . Keep on pressing and holding the button until 4 to 5 clicks are heard . To
avoid thread stripping, do not overtighten . Repeat this step to install all wheel lug nuts/bolts .
4 . Unplug impact wrench male plug from 12-volt DC power outlet when finished .
5 . After all lug nuts/bolts and wheel(s) have been installed, follow the vehicle owner's manual
to remove the jack stand, lower the vehicle, remove lifting device (Jack), and wheel chocks .
OPERATION CONT.
3/4 in./19mm
13/16 in./23mm
11/16 in./17mm
7/8 in./21mm
Dual Sockets
Switch
Body
Shaft
Cord
Plug
Fuse