PT AMC123, Руководство пользователя

Страница: 35 / 104

35
Chapter 3
Getting Started
Overview
This chapter summarizes the information you need to make the AMC123 operational. Please
read it before attempting to use the board. Key topics in this chapter include:
• “Unpacking,” on page 36
• “Electrical and Environmental Requirements,” on page 36
• “Memory Configuration,” on page 36
• “I/O Configuration,” on page 38
• “Connectivity,” on page 40
• “Switches,” on page 41
– “Push-Button Reset Switch (SW1),” on page 42
– “CMOS Reset, FCLKA, SSC, and COM1 Redirection Switch (SW2),” on page 42
– “BIOS Configuration Switch (SW3),” on page 43
– “SATA, Ethernet, USB, and JTAG Configuration Switch (SW4),” on page 44
– “Hot-Swap Switch (SW5),” on page 44
• “Physical Installation,” on page 45
• “BIOS Configuration Overview,” on page 46
– “Console Redirection,” on page 47
– “USB Port 1 Control,” on page 47
– “Integrating the AMC123 with an External Hard Drive Module,” on page 48
• “Installing the Operating System,” on page 50
• “Installing Drivers,” on page 51
• “PCI Device Summary,” on page 53
• “Programming the User LED,” on page 54