Psion VH10, Руководство пользователя

Страница: 75 / 166

Chapter 4: Configuration
Add and Edit Trigger Mapping
67
Psion VH10 Vehicle-Mount Computer User Manual
Remove
Tapping this button removes an existing mapping.
OK
The OK button in the top right of the Manage Triggers screen saves all changes made. If the cancel button X
is tapped instead, or the [ESC] key is pressed, all changes will be discarded.
4.12.2 Add and Edit Trigger Mapping
These dialogs allow you to add and edit trigger mappings.
Trigger Key
This drop-down list allows you to specify the source of the trigger events, such as the Scan , etc., for the
trigger module selected.
Add Key
Only existing trigger sources are shown in the Source combo-box. To add a new source to this list, tap
on the
Add Key button. A dialog will pop up and allow you to select the keyboard key to use as a
trigger source.
Trigger-Press Type
You can enable either an Up/Down or Double Click response to a trigger press. Normally, when a trigger
(keyboard key, etc.) is pressed and released, a “trigger down” event is sent to the “owner” — that is, the ap-
Note: It is possible to map the same source to different modules — for example, to both the Imager and
Decoded Scanner. If so, both devices/operations will occur simultaneously. This is not recom-
mended in most cases, especially with devices such as Imagers or RFID Readers.
It is also possible to map different sources to the same module — for example, two different trigger
keys can be mapped to the RFID File System.