Psion VH10, Руководство пользователя

Страница: 109 / 166

Chapter 4: Configuration
Wi-Fi Config: Configure
101
Psion VH10 Vehicle-Mount Computer User Manual
Connect: Used to connect to an already existing wireless network configuration.
Add New: Used to create a new wireless network configuration.
Edit: Used to change values in an already existing wireless network configuration.
Remove: Used to delete a wireless network configuration.
Scan: There are two methods available when configuring a radio network — you can either scan for an exist-
ing network or manually create a network. If you tap on the Scan button, a list of networks detected by the
radio is displayed. Highlighting one of the listed networks and tapping on the Add New button creates a new
profile that is completed based on the security capabilities detected by the radio. You may need to add ad-
ditional information, depending on your network requirements.
4.27.2.1 Manually Creating a Network
If you tap on the Add New button rather than the Scan button, you can create a network manually.
• Enter the SSID (Service Set Identifier) for your network.
4.27.2.2 Authentication Mode
The VH10 supports several classes of authentication — Open , WEP , WPA/WPA2 (Personal PSK, Enterprise,
CCKM-WPA, CCKM-WPA2) , and 802.1x with EAP . Tapping on the Auth. Mode menu displays your authentica-
tion options.
Important: The steps below describe how to manually create a network. Keep in mind that this is
intended only as an example and may vary from your own network requirements. If, for
example, you are using a different type of security for your network, the fields you com-
plete may not match those described here.