Psion Teklogix Vehicle-Mount Computer 8255, Руководство пользователя, Страница: 162 / 348

Chapter 7:Setting Parameters
Code 39
136
Teklogix 7035, 8255 & 8260 Terminals User Manual
Mod 43 Chk
If this parameter is enabled (set to “Y”), the Mod 43 check digit is calculated.
Mod 10 Chk
If this parameter is enabled (set to “Y”), the Mod 10 check digit is calculated.
Include Chk
If this parameter is enabled (set to “Y”), the check digit is included with the decoded
bar code data.
AIAG Strip
If this parameter is enabled (set to “Y”), the AIAG data identifier is removed from
each decoded Code 39 label. The data identifier occurs in the first position next to
the Code 39 start character. It can be a single alphabetic character or a series of
numeric digits followed by an alphabetic character. This identifier defines the
general category or specific use of the data contained in the rest of the bar code.
Note: This parameter should not be used in conjunction with the TESS AIAG
feature. This is because the terminal performs the strip function before it
processes the data through the AIAG feature; if the prefix is stripped, the
data is not identified as AIAG.
Err Accept
If the “Err Accept” and “AIAG Strip” parameters are enabled (set to “Y”), all
label data without an AIAG identifier character is accepted. If the “Err Accept”
parameter is disabled (set to “N”) and the “AIAG Strip” parameter is enabled
(set to “Y”), the label data is not accepted.
Size/Chars
Field Size 0 0-99
Prefix Char 0 0-255
Suffix Char 0 0-255
Strip Leading 0 0-127
Strip Trailing 0 0-127
Size/Chars Range