Psion Teklogix Omnii XT10, Руководство пользователя

Страница: 37 / 358

Chapter 2: Basic Operation
Wi-Fi Config: Configure Tab
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual 21
There are two methods available when configuring a radio network—you can either scan for
an existing network or manually create a network. If you tap on the
Scan button, a list of
networks detected by the radio is displayed. Highlighting one of the listed networks and
tapping on the
Add New button creates a new profile that is completed based on the security
capabilities detected by the radio. You may need to add additional information, depending
on your network requirements.
If you tap on the
Add New button rather than the Scan button, you can create a
network manually.
• Enter the SSID (Service Set Identifier) for your network.
2.8.2.1 Authentication Mode
Omnii supports several classes of authentication— Open , WEP , WPA/WPA2 (Personal PSK,
Enterprise, CCKM-WPA, CCKM-WPA2) , and 802.1x with EAP . Tapping on the Auth. Mode
menu displays your authentication options.
Important: The steps below describe how to manually create a network. Keep in mind
that this is intended only as an example and may vary from your own
network requirements. If, for example, you are using a different type of secu-
rity for your network, the fields you complete may not match those described
here.