Psion Teklogix Omnii XT10, Руководство пользователя

Страница: 189 / 358

Chapter 6: Peripheral Devices & Accessories
Carrying and Protective Accessories
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual 173
6.4 Carrying and Protective Accessories
There are a variety of carrying and protective accessories to help the operator work safely
and comfortably with Omnii.
Attaching Carrying Accessories
If your Omnii is not fitted with a hand strap, you can install it using the carrying accessory
kit supplied. You’ll need:
• A Phillips head screwdriver.
Table 6.4 Accessories Model Numbers
6.4.1 Attaching the Hand Strap - Model No. ST6025
• Attach the strap to the two threaded inserts located at the back of the hand-held near
the top of the unit (see Figure 6.2), using the two Phillips head screws provided with
this accessory.
Note: Omnii Hand-Held Computer is a body worn device, and to maintain compliance with
the FCC RF exposure guidelines, use a Psion Teklogix approved carrying case. Use
of non-approved accessories may violate FCC RF exposure guidelines.
Important: Do not use adhesives such as Loctite to secure screws on carrying
accessories. These chemicals may damage the plastic casing.
Accessory Model Number
Wrist Strap ST6040
Hand Strap ST6025
Shoulder Strap ST6030
Soft Shell Holster ST6050
Hard Shell Holster ST6055
Forklift Holster ST6051
Carrying Case ST6090
Pouch ST6091
Screen Protector ST6112