Psion Teklogix OMNii HDK XT10, Руководство пользователя

Страница: 13 / 192

Chapter 1: Introduction
About This Manual
Psion Teklogix Omnii HDK User Manual 3
1.1 About This Manual
This manual provides guidance on creating expansion devices for Psion Teklogix Omnii devices
using the Omnii HDK. The manual is organised into the following chapters:
Chapter 1: Introduction
provides an overview of the Omnii Hand-Held Computer and the Omnii HDK.
Chapter 2: Getting Started
provides at-a-glance information about the capabilities of the HDK.
Chapter 3: Hardware
describes, in general terms, the hardware of Omnii.
Chapter 4: Software
gives an overview of the registry entries and API for controlling expansion devices and the
installation of device drivers.
Chapter 5: Mechanical Considerations
describes the physical aspects of designing and mounting expansion modules.
Chapter 6: Omnii Expansion Ports and Connectors
describes the connectors on Omnii, including the three standard expansion ports and docking
adaptors.
Chapter 8: EEPROM Specifications
describes the details of programming I2C and 1-wire EEPROMs for expansion modules.
Chapter 9: Breakout Board
describes the features and functions of the Omnii HDK breakout board kit (sold separately).
Chapter 10: HDK Demo Application
describes the features and functions of the HDK Demo application program.
Appendix A: Resources
lists extra resources which may be of use in conjunction with the HDK.
Appendix B: Omnii Specifications
lists the specifications of Omnii.
Appendix C: HDK License Agreement
provides the license agreement that is assumed by using the Omnii HDK.