Chapter 4: Mechanical Considerations
Overview
Psion Teklogix
NEO
HDK User Manual
31
4.1
Overview
This chapter describes the physical connectors, space, and mounting of an add-on device.
4.2
HDK Mechanical Files
The
NEO
Hardware Development Kit provides the following mechanical models and
drawings:
4.3
Installation
Add-on devices can be screw-mounted using the four threaded anchor points, or snap-
mounted using the three mounting slots.
To ensure proper connection with the expansion port contact pads, it may be necessary to
remove the black Mylar overlay that surrounds the expansion port. To remove the overlay
insert a small flathead screwdriver between the overlay and the case and
carefully
pry it off.
Filename
Description
neo_housing_and_bracket_asm.igs
3D CAD drawing of the back cover of
the
NEO
neo_expansion_PAD_DETAILS.pdf
2D drawing of the back cover of the
NEO
, with distances between anchor
points
Important: If the add-on device connects to any of the 16 small connector pads, it
should be screw-mounted. Snap-mounted devices should only connect via
the 2 large connector pads.
