Explanation of Individual Menu Items
4-16
4.2.2 PCL MENU
Definition of the parameters for character presentation on a page.
Note:
The PCL MENU will only be displayed if EMULATION = PCL is selected
in the GENERAL MENU.
$
FONT NUMBER
The font number selects one of the 57 PCL typefaces as the default font
within the PCL emulation. A printout of the PCL TYPE LIST can be started
within the TEST MENU. Default is font no. 0 (COURIER)
$
PITCH
Pitch defines the character size for FONT NUMBER 0 and 39 to 44. Any
value from 0.44 to 99.99 CPI can be selected.
Default value is 10.00 characters per inch.
$
POINT SIZE
For FONT NUMBER 1 to 38 character scaling is defined as point size.
Values can be selected from 4.00 to 999.75 PT in steps of 0.25.
Default value is 12.00 PT.
Note:
FONT NUMBER 45 to 56 are not scalable, neither the menu item
PITCH nor POINT SIZE is applicable.
STITCHING POINT
This parameter adjusts the overlapping of both LED heads
in
printer models
with procuct numbers 8707 400 030xx, 8707 410 030xx and 8707 410 032xx
If an overlapping is visible in the printout the user has the possibility to shift the
overlapping point in an unprinted area.
The position on the paper can be adjusted horizontally in the
+/-
range of
7
inch
(177.8 mm)
with steps of 1/10 inch (2
.
5 mm).