PSI Audio A14-M Скачать руководство пользователя страница 1

Страница: 1 / 3

Relec SA – Petiots-Champs 11 a+b – 1400 Yverdon-les-Bains –

- +41 24 426 04 20

PSI AUDIO - Re-assembling A14-M

Don’t power up the electronics prior to assembling.

The cables need to be attached to the print and on the A14, the level axis needs to be attached to the potentiometer

(see photo below)

Содержание A14-M

Страница 1: ...ns info rpsiaudio com 41 24 426 04 20 PSI AUDIO Re assembling A14 M Don t power up the electronics prior to assembling The cables need to be attached to the print and on the A14 the level axis needs t...

Страница 2: ...way round and respecting polarity On the A14 the level axis needs to be attached to the potentiometer Make sure the Level axis in turned to cal Make sure the potentiometer is also in cal position When...

Страница 3: ...o rpsiaudio com 41 24 426 04 20 Fasten screws on back panel These screws are not meant to be removed and replace Please don t fasten too tight If necessary use a small drop of glue in the screw hole o...